* Download files on this page are compressed by ZIP file format.
| HYPRO PLANET CUTTER (PNTC Single Point) |
|---|
| Large-pitch internal threads are machined in a stable manner! (P=4 internal threads are machined in a single pass in carbon steel) |
 (9.79MB / 70seconds) |
| HYPRO PLANET CUTTER (PNTC SL) |
|---|
| M120x4.5 threads can be machined on a BT40 machine. |
| (4.56MB / 35seconds) |
| CC-SUS-SFT |
|---|
| Able to tap stainless steel with water soluble coolant!! |
| (8.2MB / 45seconds) |
| S-XPF |
|---|
| They perform exceptionally well in alloy steels, forged steels, and hardened steels up to 35HRC! |
| (4.61MB / 26seconds) |
| WX-ST-PNC |
|---|
| Ideal for machining hardened steel! Does not chip even under severe working conditions. |
| (3.36MB / 20seconds) |
| WXO-ST-PNC |
|---|
| Ideal for machining hardened steel! Does not chip even under severe working conditions. |
| (6.11MB / 39seconds) |
| HS-O-OTT |
|---|
| High speed tapping in Cast iron and Alluminum alloy |
| (6.14MB / 40seconds) |
| WX-PNC |
|---|
| Thread milling with synchronized 3 axis machining center |
| (9.05MB / 55seconds) |
| Mega Muscle Drills (TRS-HO-3D/TRS-HO-5D） |
|---|
| The 3 flute design enables high speed hole processing! |
(13.8MB／75seconds)  2010.03.25 |
| HSS NEXUS Drill (NEXUS-GDS） |
|---|
| New Coating, high speed, long tool life HSS drill. |
| (6.66MB／32seconds) 2010.03.25 |
| HSS Extra-Long Drill (TDXL） |
|---|
| HSS drills without coolant-holes can drill deep holes. |
| (13.1MB／68seconds) 2010.03.25 |
| FTO-30D |
|---|
| Low thrust, enhanced durability, and stable drilling have been achieved through the adoption of a new point form and a new coating! |
| (10.8MB / 51seconds) |
| TRS-HO-3D |
|---|
| The 3 flute design enables high speed hole processing! |
| (11MB / 63seconds) |
| UVM-DRL |
|---|
| OSG's Extra Small-Diameter, Ultimate V Micro®Series |
| (5.24MB / 50seconds) |
| CAO-GDXL |
|---|
| Drilling operation of 30 dia. deep hole in Copper and Alluminum alloy |
| (2.52MB / 16seconds) |
| FTO-3D/5D |
|---|
| Drililing with stable low thrust and torque with long tool life |
| (4.85MB / 34seconds) |
| FTO-GDXL 1 |
|---|
| Stable drilling of 30xdia. deep hole in Steel |
| (3.64MB / 24seconds) |
| FTO-GDXL 2 |
|---|
| Drilling of 30xdia. deep hole with one stroke |
| (6.17MB / 37seconds) |
| CBN End Mill Series (CBN-SXB） |
|---|
| Ideal for finishing high-hardness materials. |
| (6.69MB／37seconds) 2010.03.25 |
| CBN End Mill Series (CBN-SXR） |
|---|
| The helical flutes are changing the CBN end mills |
| (9.22MB／46seconds) 2010.03.25 |
| High-precision bull nose end mill (WXS-CPR） |
|---|
| From ball to radius |
| (6.04MB／44seconds) 2010.03.25 |
| Nano Blade |
|---|
| It is possible to achieve a Nano level surface roughness using only one milling tool (Blade) |
| (9.24MB / 51seconds) |
| NEO Series |
|---|
| Introducing the highly evolved "variable-lead"shape! Suppresses chattering, allowing for outstanding milling performance. |
| (10.6MB / 53seconds) |
| DG Coated End Mill Series |
|---|
| For graphite, use DG. |
| (5.39MB / 37seconds) |
| WH Roughing End Mill Series |
|---|
| The next generation of HSS endmills! Supporting a wide range of machining applications, wet or dry! |
| (7.76MB / 34seconds) |
| PHX-PC-DBT |
|---|
| Ballnose endmill with high efficiency even at the big overhang length |
| (5.11MB / 32seconds) |
| PHX-PC-DFR |
|---|
| Bullnose endmill with high efficiency even at the big overhang length |
| (6.09MB / 38seconds) |
| UP-PHS |
|---|
| High efficient slotting and side milling with little chattering |
| (3.52MB / 33seconds) |
| WXL endmill series |
|---|
| A wide range of choice in coolant and work material |
| (2.78MB / 21seconds) |
| WXS-EBD |
|---|
| High speed milling in high hardened material |
| (5.02MB / 32seconds) |
| WXS-EMS |
|---|
| High speed and precision milling in high hardened material |
| (4.99MB / 34seconds) |
| FX-ZDS |
|---|
| Counterboring on a slope without prior hole |
| (3.05MB / 18seconds) |
| WX-SHTSS |
|---|
| Plunging and slotting |
| (5.01MB / 31seconds) |
| WX-PHS |
|---|
| Slotting and side milling |
| (3.99MB / 24seconds) |
| WX-CR-PHS |
|---|
| Variety of operations, such as slotting and ramping |
| (4.36MB / 26seconds) |
| WX-CRE |
|---|
| High feed milling |
| (5.07MB / 31seconds) |
| FX-HS-EBDS |
|---|
| High efficient milling with shrink fit system |
| (3.29MB / 20seconds) |
| FX-MCF |
|---|
| Excellent surface roughness by this cermet endmill |
| (4.18MB / 25seconds) |
| FXS-MFE |
|---|
| Precision milling on high cavity walls |
| (4.57MB / 27seconds) |
| OSG PHOENIX SERIES |
|---|
| The first introduction videos of new indexable tools from OSG. |
| (14.2MB / 83seconds) |
| PHX-IR-DFR |
|---|
| The PHX-IR-DFR can cut what was until now considered the work of ball end mills. |
| (19.5MB / 90seconds) |
| F4138 |
|---|
| For roughing and more - it's a highly-evolved roughing cutter. |
| (4.16MB / 44seconds) |
| F2334 MINI |
|---|
| Side milling, slotting, and plunging |
| (4.49MB / 28seconds) |
| F4033/F4010 |
|---|
| Eight corners on each side of insert chip can be used |
| (3.89MB / 24seconds) |
| F4041 |
|---|
| Production improvement with F4041 |
| (4.99MB / 32seconds) |
| F4042/F4010 |
|---|
| Excellent sharpness by high rake flute form |
| (5.27MB / 34seconds) |
| F4238 |
|---|
| Next generation roughing cutter F4238 |
| (4.80MB / 30seconds) |
| Disc Cutter S |
|---|
| Roughing operation in Alluminum alloy with BT30 machine |
| (4.32MB / 26seconds) |
| Disc Cutter PRO |
|---|
| Finishing operation in Alluminum alloy with BT30 machine |
| (5.32MB / 32seconds) |
